Our Products

• Quad-Lock: Insulating Concrete Forms for Walls
   
• Quad-Deck: Insulating Concrete Forms for Floors, Roofs, and Tilt-Up
   
• R-ETRO Insulation System: Add high performance insulation to existing buildings
   
• Accessories
   

QUAD-LOCK - The most versatile Insulating Concrete Forming System

Build nearly unlimited wall widths, 3 different insulation values, corners, angles, T-walls, columns, pilasters, brick ledges, and radius walls, using just a few standard components.

Panels made of Expanded Polystyrene (EPS) and Ties made of High Density Polyethylene (HDPE) create a Concrete Form that will accommodate vertical and horizontal Reinforcing Steel as required. Temporary bracing is usually required for vertical and horizontal alignment only. Filling the cavity with concrete will create solid concrete walls with 2-4 hour Fire Resistance Ratings (FRR). The EPS Forming System will stay in place and turn into the best insulation available today, saving you energy costs for the lifetime of the building.

Five different wall widths are available (nominal concrete widths of 12" [300mm], 10" [250mm], 8" [200mm], 6" [150mm], and 4" [100mm]) and can be combined with the Quad-Lock Extender Tie to add 12" [305mm] to any standard cavity size.

Three insulation values are possible, giving you the choice of true R-Values of 22, 32, and 40 h*ft²*°F/BTU / U-values of 0.28, 0.20, and 0.15 W/(m²*K).

The Quad-Lock System encompasses these components:

• Panels made of EPS, available in 2 thicknesses (2¼" [57mm] and 4¼" [108mm]) and with optional Fastening Strips
• Ties made of High Density Polyethylene (5 standard lengths plus Extender Ties and Brick Ledge Ties)
• Corner, Angle, and Window Brackets to eliminate bracing at corners and build bucks or end caps.
• Metal Tracks & Wire Top Ties for starting and finishing the wall assembly

These components will allow you to assemble all concrete forming for your walls, including corners, arches, any angles, columns and pilasters, as well as T-Wall connections. Transport and storage costs of Quad-Lock are substantially lower compared to pre-assembled block systems. Ordering and keeping track of inventory is easier (you would need at least 45 different parts to do the same with pre-assembled blocks). The Excel™-based Quad-Lock Estimating program makes it quick and easy to calculate all materials needed for your job and the cost.

Also refer to the Quad-Lock Accessories below.
 

Quad-Deck is a high-quality ICF for suspended concrete floors and roofs and can also be used to form walls for Tilt-Up applications. More Information
 

R-ETRO Insulation System

Easily add R-18 insulation to existing walls. More Information
 

Quad-Lock Accessories

• Wall Alignment & Scaffolding System: Adjustable and reusable steel & aluminum bracing system; up to 15% productivity increase over lumber bracing & scaffolding. Available for sale or rent from most Quad-Lock Dealers
  
   
• Ledger Brackets and Hangers: Galvanized steel ties for easy mounting of wood or steel ledgers.

  
  ICF Ledger Connector System by Simpson Strong-Tie Co.
   

• Drainage Board/Dimple Sheet: Delta®-MS Clear by Cosella Dörken; a durable plastic membrane to damp-proof basements and foundations. See installation instructions.
  
   
• Peel & Stick Membranes: for damp-proofing & water-proofing basements and foundations
  
   
• Window Fasteners: Large Washers for screwing Quad-Lock Panels to internal window/door bucks - also available in stucco-friendly version
   
   
• Rebar Chairs: Provide a clearance of ¾" [19mm] between rebar and lintels or bottoms of Quad-Deck beams
  
   
• Track Fasteners: Zamac Nail Drive Anchors from UCAN Fastening Products ¼" x 1¼" [6mm x 31mm]
  
   
• Grappler: Baker Plate with Foam Locks
  
   
• Low-Expansion Spray Foam:: To fill gaps and restore insulation at utility chases
  
   
• Electrical Boxes for ICFs: Plastilock